Alrightie, as promised I made a trip to the shop today and took my camera with me to see exactly what all was going on. Here are some of the results.
I wanted to take my new sport gauges to get them installed also since we decided to go ahead and put in the new instrument bezel I have. The black on the bezel will also be painted red to match the other stuff. But first I wanted to put in new bulbs. Since I had some LED's handy, why not?
I laid everything out, had red, green, and clear. Went with the clear.
So I went to the back of the cluster, and found the 194 bulb holders.
Pulled them and installed the LED's in place of the 194's
The bulbs looked like this. Then just replaced them in the sockets and was gone.
The overhead console had been painted and installed. It's red, LOL
I started the truck and checked the controls on the steering wheel.
And they work great. Just needs to be programed and ready to go.
An overview shot. Radar detector is installed and working.
Now some of you that have been following this thread and install know the doors looked like crap. So I bought new door panels and gave them some ideas and here is what we decided on. A wood/fiberglass overlay.
The other door panel. These will be trimmed out in red also.
To give you an idea how they will fit, I inserted the tweeter, mid, and crossovers.
The crossovers.
The tweeter and mids.
Clear Corners and new grille. Will cut out now and add the billets.
Ordering new head lights now. Didn't know how bad they were till the corners were added.
One close up shot for Al
A rear view shot of the Boston's and Alpine 500's.
A different angle.
Flash turned off.
From the inside looking back, the 2 Alpine 540's fired up.
A view of them lit up.
A little closer.
This is what the 500's sit on. Plexi glass and lights inside.
A shot at the cap.