Telebend
Member
- Joined
- June 23, 2010
- Messages
- 10
- Reaction score
- 0
- City, State
- Landrum, SC
- Year, Model & Trim Level
- 1992 4X4
1992 Explorer 4x4
The EEC fuse blows unless the small connector on the driver's side of the trans just above the pan is unplugged. How do I determine which solenoid is the culprit? If I have to replace the solenoid(s), is there anything else I should do while in there? Could it be something other than the solenoid(s)? The truck has almost 300k on it, 2 tranny rebuilds so far, and a new fuel pump, but runs fairly well until this.
any suggestions? this newbie would appreciate it!
The EEC fuse blows unless the small connector on the driver's side of the trans just above the pan is unplugged. How do I determine which solenoid is the culprit? If I have to replace the solenoid(s), is there anything else I should do while in there? Could it be something other than the solenoid(s)? The truck has almost 300k on it, 2 tranny rebuilds so far, and a new fuel pump, but runs fairly well until this.
any suggestions? this newbie would appreciate it!