Turbo boost sensor

[explorerheadache510]

Hi all

I am getting a p0299 code but have no loss of power and assume it's a sensor. Maybe turbo boost sensor? Can anyone tell me where it's located? 2012 limited with 2.0.

Thank you!

 

[peterk9]

Just wanted to say, Welcome to the Forum.
Maybe this will help. ford p0299 fault code - Google Search

Peter

 

[mguy13sport]

The intake tubing to the turbo is probably not tight or the wastegate is malfunctioning.

 

[explorerheadache510]

The car runs the same as it always has. You may be right though because I found and replaced the sensor And nothing. Lights still on. Thanks

The intake tubing to the turbo is probably not tight or the wastegate is malfunctioning.

 

[mguy13sport]

I had the same code before and the linkage on the wastegate had broken off and the clamp holding the tubing to the turbo was not tight

 

[explorerheadache510]

I had the same code before and the linkage on the wastegate had broken off and the clamp holding the tubing to the turbo was not tight

Did you remove the cat and inspect the waste gate? How did you access the linkage? Thanks