rlncjnfty
New Member
- Joined
- March 13, 2010
- Messages
- 1
- Reaction score
- 0
- City, State
- South Fulton, TN
- Year, Model & Trim Level
- 2002 Ranger XLT
Just did one this past weekend. Rather than go through all the irritating BS with the bolts I find that it is MUCH easier to support the lower control arm and pop the ball joints loose. This allows you to get the whole assembly out and over to a bench to use an impact wrench or at least a socket and ratchet to get those three pesky bolts out. Lots less stress on the human.