arttyszka
Active Member
- Joined
- June 30, 2013
- Messages
- 50
- Reaction score
- 0
- City, State
- Plymouth, MN
- Year, Model & Trim Level
- 2014 Sport
I had a local shop put the H&R (Flex) springs in my Sport last October, everything was fine up until a couple weeks ago when I started noticing a slight "creek" in the front suspension when turning. It got more annoying so I took it into the dealer to check out. They said the driver's side upper strut bearing was altogether missing and that it must have been done by the shop that swapped the springs, seems odd.
So they replaced the bearing, and did a full alignment. Tech says the noise is coming from the sway bar, and that it's because the geometry has changed due to the springs, but it wasn't there before, and now seems just as bad as before taking into the dealer.
Has anyone else with H&R springs experienced any front end noise?
ISSUE RESOLVED - See below.
So they replaced the bearing, and did a full alignment. Tech says the noise is coming from the sway bar, and that it's because the geometry has changed due to the springs, but it wasn't there before, and now seems just as bad as before taking into the dealer.
Has anyone else with H&R springs experienced any front end noise?
ISSUE RESOLVED - See below.