so im curious, do you thinks a 2001-2005 or newer front bumper will bolt onto the 95-2001 explorer frame horns & are those stock explorer flares on the back or are they Ranger flares, they tend to look different?
So do you have any modification pics to what you did to make the rear flares work on the explorerThe fender flares all came over from the Ranger. I had to cut them in to fit the rear.
I just held the flairs where I wanted them, marked a few holes for the fender clips, drilled them, installed the fender with enough clips to hold it in place, then marked the rest of the holes and used a scribe, dragging it along the fender to mark what needed to be cut-off for better fitment. I was able to use a utility knife to trim them to fit. They don't fit perfect so I used a little black caulking.So do you have any modification pics to what you did to make the rear flares work on the explorer
Props on the body line / stripe deal, way to tie it in without spending hours of sheet metal fab.
Looking good Blown!
ditto.
I was thinking a set of the wider and streamline mountaineer door moldings would look good too.