Auto & Truck Parts For Sale

Thanks all. Everything has found a new home. This is part 2, since I ran out of attachment room, but I want to be sure everyone gets to see what they might buy. So as I wrote here ... $200 -- Surco S5060 50”x60” roof rack, LT100 light brackets (brackets are new, rack was on for 6 months) On Amazon; Amazon.com: Surco S5060 50" x 60" Safari Rack: Automotive, and Amazon.com: Surco LT100 Light Bracket for Safari Rack: Automotive $200 -- Trail Gear 12000-1-KIT universal rock slider kit, with rock slider mount kit (New) These would need to be slightly shortened for the Sport, should be fine for the 4-door. They're unfinished, and very solid, and come with the legs and extra mounting plates and gussets. I never got to this, so all the...

I have some left over parts from some front 5 x 5.5" conversions I was trying out. I have a Rh/Lh front knuckles from a 1997 Ford Ranger these would be a upgrade to swap over to the full floating front brake calipers, I also have the calipers, caliper brackets, and some new brake pads to with them. I have a single non ABS dana 35 spindle and a single spindle with ABS. Open to offers on all I'll try to get some pictures up this weekend.

Hello. I have for sale the stock tires from my 2020 Explorer ST. They have less than 200km (so 120 miles) on them as I put winter tires on the stock rims when I purchased the ST last October. So they have sat in my garage all winter waiting for a new home. I just purchased 22 inch summer wheels and tires so I no longer have a need for these. They are 275-45-21. I live in Edmonton, Alberta, so hopefully there is another Explorer ST owner nearby! Not sure about shipping any great distance but I am open for suggestions.

Up for grabs is a front end only, TTB Rancho lift kit. Was removed from a 93 Explorer, but can be used on TTB Rangers as well. $500.00, You pickup preferred. Shipping is completely on your dime, including any packaging materials used. I began restoring this kit, but changed my mind on using it, half way through the job. The Radius arms, RA Frame mounts, TTB arm brackets, shock mounts, and Kick bar have all been fine sand blasted, and ceramic coated. No stress cracks or weld defects was found after blast inspection. Kit includes the Rancho coil springs, and a set of coil spacers. All Grade 8 hardware is used, but all in perfect condition. I would have no issue re-using any of it. The items still in red, have some worn black...

New unboxed Magnaflow high-flow catalytic converter, part number 23388. Never installed. Fits 1989-92 Ford Rangers with 2.9L V6, 1991-1994 Ford Rangers and Explorers with 4.0L V6. Has flange gasket. Retails for $360+. May ship at buyer's expense. Local pickup prefered. Located in Alpha NJ, 08865 $220 or best offer. Feel free to PM or Call/Text. (nine-zero-eight) three-two-three five-two-three-nine.

I have a ton of parts for first gen Ford explorer and ranger. I have pics of everything available, if it's still on the list, it's still available. Willing to ship any of the smaller stuff on buyers dime from San Diego. Brian Fab polyurethane motor and transmission mounts - 100 for the set Custom bolt on prerunner style winch bumper - 100 Custom tube rear bumper with hitch - 80 Stock grille tan - 20 Passenger head light assembly - 10 Passenger tail light - 10 Light switch - 10 Review mirror - 5 Ac compressor - 10 Alternator - 20 Nearly new (less than 100 miles) coil pack - 40 Nearly new (less than 100 miles) ignition module - 40 Instrument cluster with 70k miles - 20 Computer for 91 explorer without egr - 40 4x4 switch - 10 Driver...

SET SOLD LOCALLY!

Pair of spindles with calipers and brackets off an 04 Aviator. They are in good used condition with some small hammer marks from previous front end work. Calipers and pads seem good to go but they have been on my shelf for over a year so I recommend using the calipers as cores just so you don't have any issues. These are the best factory brake swap for 02+ Explorer or Mountaineer. It is completely bolt on. THESE WORK ON 17" WHEELS AND LARGER ONLY!!!!! I tried to use them on a larger offset than factory 16s and it wasn't even close. Prices are as followed..... (Elite members take $25 off) East coast: $225 Shipped Midwest: $245 Shipped West coast: $275 Shipped

Complete kit to do the upper/lower thermostat housing problem that a lot seem to get. Also comes with the newer style sensors to swap over and retainer clips. 4L5Z-8592-AA RH165 upper thermostat housing 2L5Z-8592-BB RH144 lower thermostat housing 1L2Z-8255-AA RG614 lower thermostat housing seal W702837-S300 thermostat seal (aka large o-ring) 2L2Z 8575 AA RT1167 thermostat 3F1Z-10884-AA SW6146 temperature sensor 3L8Z-12A648-BA DY1004 temperature sensor 2 - W706800-S303 sensor retainer clips $150 shipped and insured.

Like new! Was installed in the truck, and removed after 2 weeks of use, but with Cabella seat covers on them. Went a different route. Stored in original plastic bags, inside a climate controlled area. These have dual slider base's. Double extra goodness! Drivers has lumber air bladder added! Slotted for 5 point seat harness. Fully reclining suspension seats that are comfortable, and can be used for a Daily driver. They shine on the trails with the side leg & torso supports, that keep you in the seat. Bolsters are not crazy high on these, which makes them great for everyday use. Paid $1200.00, offering them for $900.00 local pickup only, in STL, MO. My loss is your gain. Black on black with black stitching.

Full set of seats from 4 door XLT Explorer. Asking $400.00. Free central Florida pick up or plus shipping cost/method such as Uship of your choice. Drivers seat as pictured has most wear. The seats are complete with tracks and working electric motors.

Black with Chrome and clear, your choice 25.00 shipped. Picture shows white but these are bright silver and black. The Black with Red and Clear , Explorer V8 cover is 35.00 shipped. I will accept paypal Start a conversation with me for details. Thanks for looking!

This was a Ford production line take off. It is exactly what Ford had installed on the production line. It came with a motor I bought. It is the Clutch disc, pressure plate and flywheel from a 2002 Ford mustang GT 4.7l

These are a great upgrade. Low beam has a sharp cutoff like projector headlights. Comes with 60/80 watt bulbs https://scontent-msp1-1.xx.fbcdn.net/v/t1.0-9/p720x720/87301898_4047265435298571_574000113999937536_o.jpg?_nc_cat=110&_nc_sid=843cd7&_nc_oc=AQlJYggUNOKz8eZzPcv36HKbyGOBHJMhbelTylpULdFWG1t1Y4aYVopnG542dIDMzLU&_nc_ht=scontent-msp1-1.xx&_nc_tp=6&oh=fc4bf3d30adb77a61bb176ba90919d07&oe=5E832A11

These 4340 chromoly axles also have virtually indestructible CTM u-joints installed in them. The long side are brand new unused, un-assembled. The short side have been assembled and run, but are in great condition. I ended up getting a set of RCV axles instead.