Search results

My '97 just started the same symptoms. Just subscribing to this thread

I'm in

Yep I had the same problem and I looked in the black barrel in the driver's door and one of the wires had snapped. Just get yourself a little bit of wire and two butt connectors and you should be good to go. To access the wires in the black barrel: first take a flathead screwdriver and pop the...

bump

1991 F150 4x4 302. I bought this truck this past summmer to use as my work truck and it has always had a higher than normal idle. (in park 1500rpm's) Well after doing some research, I finally tried to tackle the problem. Well first I went to the IAC and unplugged the harness from it. Once...

If you pay off a credit card debt, how long does it take to show up on your credit as zero balance and as paid off? Also if you call and close the account how long until it shows up as closed?

I thought about it, but the fluid is still leaking out and I thought that the JB wouldn't stick, do you know what the name of the part is? My haynes manual doesn't say. Thanks

Hey guys, my work truck 1991 F-150 302 4x4 power steering went out. I have located the leak and am having trouble finding out what the name of the part is: the leak is on the metal line that is coiled up and is connected to the rubber hose on the power steering pump. There is a hole in the...

dmasini, I played against Kinney in High School. I went to Freeman. I guess you went to PH? Small World isn't it?

JamesT, How close are you to Tim Mcgraw? Have you met Faith?

yup just got mine in the mail yesterday. Pretty sweet.

64.5

Mine from Autozone kept breaking too (had to replace 2 sets) , so I just got a scrap 2x4 and now that is my hood support.

since I bought it I would like to hook up the lights, do you know which wires go where on the 775? Thanks

what about the 775 relay?

I have the Remote Starter Bulldog RS85 installed and working properly except for two things: 1. I can't get the factory remote to work 2. I can't figure out the 775 Relay for the parking lights to flash. Anyone have any input? Thanks Once I have these things figure out I am going to post a...

Has anyone been able to use the factory remote completely with this install? I am doing the install tommorrow and have the 775 and the t-harness on a RS-85. thanks guys

the bulldog RS85 is one that will work with the factory remote. I plan on doing this very soon. And using the t-harness it should only take an hour or so to do it yourself. Check this thread http://www.explorerforum.com/forums/showthread.php?s=&threadid=92567

blee what was the outcome? I am about to do the same install.

my dad's friend was waiting for his daughter's date for Homecoming and when the guy came to the house the dad sat him down in the living room while the wife and daughter were upstairs doing the finishing touches. So the dad sits the kid down and asks the kid what his plans were for the evening...

shelby, I am having the same problem with my '97. What exactly is the barrel that you are talking about? Should I start with the big black piece that hooks up underneath my switch where all of the wires for the windows etc.? then work my way through that harness? What do you suggest? Thanks

blee, the place you go in MD, are there many ex's there. THe place I go to here in Richmond sucks when it comes to newer vehicles. thanks

rapdes, did you replace the sensor? is that the correct one from autozone?

Willie, what was the outcome?

Ok guys, so I replaced the egr valve & egr tube. When I fire up the X and while in the in park or neutral and give it gas and rev the engine the engine sounds great. No leaking that I can tell. BUT when it is in gear and I am accelerating, I can still here the freakin leak still on the...