buttfly
New Member
- Joined
- June 9, 2006
- Messages
- 9
- Reaction score
- 0
- City, State
- Germantown, MD
- Year, Model & Trim Level
- 2005 XLT
Ok i'm stuck. I had a viper 791xv remote start system installed on my 2005 ex, works great. Only problem is the factory keyless entry remote included a button for popping the liftgate glass, which consequently the 791xv remote doesn't pop the liftgate glass without a relay......supposedly.
Ok, this isn't brain surgery, yet i can't seem to get this to work. There's got to be someone in this forum who has this alarm and wanted to remote open there liftgate glass.... and done it...... How do you do it?
I've tried wiring up a relay, cuz that's what everyone keeps telling me, but it doesn't work. Specifically here's what I've tried. I found the purple/yellow wire coming out of the box on the rr interior, just behind the trim where the 2nd row seatbelt is. Anyway, connected the purple/yellow wire coming out of that box to the 87 terminal on the relay and the rest like this:
86 12V+
30 12V+
85 (-)200mA trigger from alarm (red/white wire in H1 harness)
87 purple/yellow liftgate glass release wire
when i push the aux button on the 791xv remote (to activate the channel 2 validity output) for the 1.5 seconds, nothing happens. What am i doing wrong here? Is there a chant or dance i have to perform to get this to work?
Ok, this isn't brain surgery, yet i can't seem to get this to work. There's got to be someone in this forum who has this alarm and wanted to remote open there liftgate glass.... and done it...... How do you do it?
I've tried wiring up a relay, cuz that's what everyone keeps telling me, but it doesn't work. Specifically here's what I've tried. I found the purple/yellow wire coming out of the box on the rr interior, just behind the trim where the 2nd row seatbelt is. Anyway, connected the purple/yellow wire coming out of that box to the 87 terminal on the relay and the rest like this:
86 12V+
30 12V+
85 (-)200mA trigger from alarm (red/white wire in H1 harness)
87 purple/yellow liftgate glass release wire
when i push the aux button on the 791xv remote (to activate the channel 2 validity output) for the 1.5 seconds, nothing happens. What am i doing wrong here? Is there a chant or dance i have to perform to get this to work?
