petey48
New Member
- Joined
- March 25, 2008
- Messages
- 8
- Reaction score
- 0
- City, State
- WNC
- Year, Model & Trim Level
- '94 Ranger XLT
Hello guys, first time poster here so first off I'll say "Howdy" to everyone. Now for my problem, I need to replace the radius arm bushings on my 94 Ranger 4x4 and I need a few pointers. I checked it out this afternoon and it don't look to bad. Is the back of the Radius arm all that has bushings? Are they bushings at the front where it splits to go over the axle? I noticed the brace where the arm goes through is bolted together in the center, is that brace all that has to be taken out? or do the shocks and the coil springs have to be removed? I had read a post earlier about someone grinding some rivet heads off and using 7/16 bolts for replacement. That was on an explorer, will I have to do that? I also got some other projects coming but I'll start with this one. Thanks