- Joined
- January 11, 2001
- Messages
- 15,189
- Reaction score
- 74
- City, State
- McVeytown, PA
- Year, Model & Trim Level
- '18 XLT
Just thought I'd post a couple of pix of my latest project...
What is in the car now:
What I'm building to replace it
:smoke: :
Whaddya think???
What is in the car now:
What I'm building to replace it
:smoke: :Whaddya think???
) , Summit Harmonic Balancer, and Tri-Y ceramic coated headers. Right now the tranny is a C-4 (shifts like someone rebuilt it with a shift kit) with 2.80 open gears in a 8" rear. I'm probably going to put 3.55 gears with a limited slip in, and we may switch over to a T-5 Tranny.
. There have been a couple of small changes since I last posted. I switched from Tri-Y headers to Mac Long Tube headers because the Tri-Y headers wouldn't fit on the car with the power steering, and I also switched to an Edelbrock 600 cfm 4bbl because the Barry Grant was defective (no idle). I also installed a 1 1/4" front sway bar, a 1" rear sway bar, a Currie 3.27LS 8" rear, a transport bar, a Monte Carlo bar and some other small goodies. 
