1994 explorer projector retrofit

dreddog47 · June 28, 2011

For the full story, go here

http://www.hidplanet.com/forums/sho...ord-Explorer-MH1-Retrofit&p=409829#post409829

For a brief synopsis, don't go there.... stay here....

So far I've tweaked both projectors, opened both housings, and have one side just about done. I won't seal it up until I can mount the headlight on the truck and check the rotational alignment, then I will seal the lens on...

As far as I know, this will be the first 91-94 explorer with projectors....

FIND · June 29, 2011

I know of at least 1 other guy who did them into his stock fluted headlamps, but great job on a great looking retrofit. Can't wait to see your installed pics and pics of the beam to show those guys with the retrofit bulbs just what they are missing.

dreddog47 · June 29, 2011

FIND said:
I know of at least 1 other guy who did them into his stock fluted headlamps, but great job on a great looking retrofit. Can't wait to see your installed pics and pics of the beam to show those guys with the retrofit bulbs just what they are missing.

wow, what a waste...

ok, rephrase... I'll probably be the first to do it correctly

dreddog47 · July 1, 2011

All finished....

LiKuiD · July 1, 2011

I can't stress how friggin awesome these look...anyone want my old silverstars?

albi1cnobi1 · July 1, 2011

I thought that was your truck, LiKuiD. Looks awesome, great job dreddog.

FIND · July 2, 2011

HID done right is a beautiful thing :thumbsup:

dreddog47 · July 2, 2011

albi1cnobi1 said:
I thought that was your truck, LiKuiD. Looks awesome, great job dreddog.

thanks

FIND said:
HID done right is a beautiful thing

Exactly, no 10,000K PnP china crap here

Anime · July 2, 2011

Pretty nice install. I'm partial to D2S systems or retrofitting OE projectors, but that is a very nice end result. What was the total cost in parts?

Your brother has good taste too, not just with the Explorer, but with the traffic advisor set behind the bumper. Nice.

Which site is it where you found the Depo crystal clears? You had to get the set with the headlamps, signals, and corners, they wouldn't sell just the headlamp assemblies?

LiKuiD · July 2, 2011

Anime said:
Pretty nice install. I'm partial to D2S systems or retrofitting OE projectors, but that is a very nice end result. What was the total cost in parts?

Your brother has good taste too, not just with the Explorer, but with the traffic advisor set behind the bumper. Nice.

Which site is it where you found the Depo crystal clears? You had to get the set with the headlamps, signals, and corners, they wouldn't sell just the headlamp assemblies?

Around $330 if I recall correctly. We couldn't find the housings separate so had to get the whole kit from procarparts.com...however now I have a pair of clear corners if anyone wants to pick them up.

Also...its the knight rider light! The power of the Hoff let's me ride through anything haha

dreddog47 · July 2, 2011

Anime said:
Pretty nice install. I'm partial to D2S systems or retrofitting OE projectors, but that is a very nice end result. What was the total cost in parts?

The next set of projectors I'm retrofitting are a set of hella E55's which use a D2S bulb.... The only downside most people see about the MH1 is that it uses a H1 bulb, but the morimoto bulbs are OEM quality, and the beam from the MH1 is actually wider then the MD2S...

The projectors/bulbs/ballasts/harness and misc odds and ends cost 270+ free shipping

The headlights I believe were around 150+ free shipping... I couldn't find any place that sold just the headlights.... See thread

http://www.explorerforum.com/forums/showthread.php?t=319426

celly · September 15, 2011

Nice work, and thanks for setting the wheels in motion on trying something new on my 2nd gen.

mr1mrwun · September 21, 2011

SWEETNESS!!!!!!!! Plan on doing this myself!

first94explorer · December 14, 2011

Niceee!!!!!!!!!!

first94explorer · December 14, 2011

Do I have to get the Depos, I can't find these. Could I try these

http://www.ebay.com/itm/280787060609?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

FIND · December 15, 2011

you can use them, but the lens is harder to get off of them to install the projector and shroud. Not much more work, just search the internet for how to use the oven to remove your lenses.

Jason c · December 15, 2011

Do you notice any glare from the chrome/diamond-cut surrounds in the housing bouncing light off?

dreddog47 · December 17, 2011

Jason c said:
Do you notice any glare from the chrome/diamond-cut surrounds in the housing bouncing light off?

the MH1 will leak a little light out, the only way to fully fix this is cover the gap in aluminum tape before putting the shroud on. Honestly, its not enough to bother anyone, it just gives the housing a little bit of a glow....

I think the explorer does this less then my bronco though. In short, its nothing to worry about

Jason c · December 17, 2011

Thanks. Good to know.

first94explorer · January 3, 2012

where can I find the 9004 alignment rings? I am having trouble finding those. I didnt order my stuff from TRS.

1994 explorer projector retrofit

Well-Known Member

Explorer Addict

Well-Known Member

Well-Known Member

bahhhhhhhhh

Elite Mountaineer

Explorer Addict

Well-Known Member

EF YEAH!!

bahhhhhhhhh

Well-Known Member

disturber of the peace

Active Member

Member

Member

Explorer Addict

The Dark Knight

Well-Known Member

The Dark Knight

Member

Explorer Features

Explorer Features

Similar threads