mjonesjr84
Member
- Joined
- August 6, 2015
- Messages
- 12
- Reaction score
- 0
- City, State
- Salem, IN
- Year, Model & Trim Level
- 02 Ford Explorer
I just picked up a '02 Limited. The only issue with it was the cruise wouldn't work. The light in the dash would come on, but not hold the speed. From researching it, I found that the switch on the master cylinder was probably the problem. I replaced it today with the one in the link below. Now the cruise will engage, but constantly pick up speed until I turn the cruise off or hit the brakes.
http://www.oreillyauto.com/site/c/d...29_1672&keyword=cruise+control+release+switch
Any ideas what would cause this? The recall harness is installed in between the switch and the factory wiring.
http://www.oreillyauto.com/site/c/d...29_1672&keyword=cruise+control+release+switch
Any ideas what would cause this? The recall harness is installed in between the switch and the factory wiring.
