1995 Explorer crank no start

[NMB2]

My wife got into a front end collision yesterday with her 1995 Explorer.... When she seen there was no fluids or anything, she went to move it and it wouldn't start again.

I had the tow truck driver bring it home, fuel pump is working, I disabled my alarm/remote start system and still won't start. I don't have a code reader but CEL is illuminated while engine cranks.

It has fuel at the rail, it has 12v at the coil, I swapped CKP sensor and still no start.

Any ideas?

Thanks,

Justin
_________

 

[JCat]

You say the fuel pump is working but this SUV has a safety feature that shuts it off in a collision.

Poor a SMALL amount of gas down the air filter box and see if she sputters.

 

[Turdle]

Does the 95 still have an ignition controller (ICM)mounted to the front radiator support like the 1st gen has?

Edit, yes it seems so. The ICM looks like this



http://www.oreillyauto.com/site/c/s...model=Explorer&vi=1119642&year=1995&make=Ford

I know on 91-94 it is mounted like this--

The reason I suggest this , is it may have been damaged in a front impact.

 

[Runnin'OnEmpty]

The previously mentioned safety feature is a
fuel inertial shut-off switch located in the passenger side
footwell, up under the dash. Press down on the
red button a couple times to reset it.