kwinters2
Member
- Joined
- November 15, 2009
- Messages
- 15
- Reaction score
- 0
- City, State
- Austin, Tx
- Year, Model & Trim Level
- 2005 Sport Trac
Hey all quick question about the reverse servo in the 5R55E. I replaced my VB today and in doing so I upgraded the O rings on the reverse servo to the Viton D rings. Installed them and then let the assembly sit in the freezer till I was ready to install. Come install time it was tight and I had to put some serious pressure on the body to get it to go up into the bore.
Does that sound about right? When I first took it apart the "plunger" just fell out. Once I added the D rings it would catch and sit in the bore but would not go in far enough for the cover to go on. Once I applied pressure and gave it a good push with my palm it went in and stayed. Am assuming hydrualic pressure will move it from here on out.
Just want to check on this as I dont want to get this buttoned up and find out I am out reverse.
Cheers and happy pre turkey day!
Kinley
Does that sound about right? When I first took it apart the "plunger" just fell out. Once I added the D rings it would catch and sit in the bore but would not go in far enough for the cover to go on. Once I applied pressure and gave it a good push with my palm it went in and stayed. Am assuming hydrualic pressure will move it from here on out.
Just want to check on this as I dont want to get this buttoned up and find out I am out reverse.
Cheers and happy pre turkey day!
Kinley