Rage1973
Well-Known Member
- Joined
- July 18, 2005
- Messages
- 169
- Reaction score
- 0
- City, State
- Yuba City, California
- Year, Model & Trim Level
- 98 Sport
Please forgive me if this is a double post. I have been reading on some posts about the replacement of ball joints for the X's. I have currently ordered new bushing and stabilizer links from explorerexpress, and I am thinking about replacing my balls joints while I will be under the front of the truck. I am a little confused though on which ones that I should get. It seems that there are several differnt types to get.
So my question is, could someone please help me out, and tell me which ones I need to get. Being stationed in Germany makes it really tough on getting parts. It isn't like I can just go down to the local parts store and change it out if it is wrong.
http://replacement.autopartswarehou...e=FO&model=EXPL--001&part=Control Arm&dp=true
Ok I am looking at doing both upper and lower ball joints. This is where I have been looking. Also if you think that I am going to need anything else for this job, please let me know. Thanks allot everyone.
Jeremy
So my question is, could someone please help me out, and tell me which ones I need to get. Being stationed in Germany makes it really tough on getting parts. It isn't like I can just go down to the local parts store and change it out if it is wrong.
http://replacement.autopartswarehou...e=FO&model=EXPL--001&part=Control Arm&dp=true
Ok I am looking at doing both upper and lower ball joints. This is where I have been looking. Also if you think that I am going to need anything else for this job, please let me know. Thanks allot everyone.
Jeremy