Infragate
Well-Known Member
- Joined
- June 9, 2004
- Messages
- 271
- Reaction score
- 0
- City, State
- Winnipeg, MB
- Year, Model & Trim Level
- 1991 XL
I put new axle pivot bushings in my 91 Xl and have a question. The old bushings were flared at the back side obviously to keep them in the bore. When i took them out they slid out easily. When i put the new ones in they took some force to push in so i did not flare them. Should i have flared them or done anything to the back after pressing them in? I also changed the fasteners to a grade 8 bolt with lock washers etc. The originals were metric but kinda worn. please let me know if these issues are alright and maybe let me hear a few stories about your experiences. Thanks