sivadnar
New Member
- Joined
- October 3, 2013
- Messages
- 5
- Reaction score
- 0
- Year, Model & Trim Level
- 1996 Explorer Sport
Y'all, here's my story: wife had a '96 Sport she bought new in college. 4.0 OHV, 2-door, 160k miles, rusted out rocker panels, runs well. Was planning to donate the truck to get it out of my driveway. 6-year-old son suggests we make it a hot rod...
Mom hits a deer, so I rebuilt it. Cranked the TT, 3-inch body lift, helper springs, 4:10 gears. Found a set of 33-12.50 on CL. Now the truck looks respectable. But, I need more...
I aspire to do the following:
- Remove the doors for the summer
- Build and install a roll bar (full cage, think modern Jeep)
- Will tear down and rehab the engine in the fall
- Replace the rocker panels
- Maybe, maybe cut the top behind the rear side windows
Has anybody removed doors, installed a roll bar, or cut the top? If so, post photos or plans.
I'll post photos of my ride if there's interest. Thanks y'all.
Mom hits a deer, so I rebuilt it. Cranked the TT, 3-inch body lift, helper springs, 4:10 gears. Found a set of 33-12.50 on CL. Now the truck looks respectable. But, I need more...
I aspire to do the following:
- Remove the doors for the summer
- Build and install a roll bar (full cage, think modern Jeep)
- Will tear down and rehab the engine in the fall
- Replace the rocker panels
- Maybe, maybe cut the top behind the rear side windows
Has anybody removed doors, installed a roll bar, or cut the top? If so, post photos or plans.
I'll post photos of my ride if there's interest. Thanks y'all.