Jeffanders
New Member
- Joined
- December 3, 2023
- Messages
- 3
- Reaction score
- 0
- City, State
- Minneapolis, MN
- Year, Model & Trim Level
- 2011, Explorer XLT 4WD
As I was driving on the interstate my blower stopped working for my heater. It kicked back on for 5 minutes then went out again and stayed out. I parked and tried to lock the doors with the key fob and there was no response from the vehicle; none of the fob functions were working. My alternate key fobs were not functioning either, I tried to reprogram a fob with no change.
After looking for other malfunctions I found that both seat heaters were not working. I have not found any other issues.
I replaced the blower resistor as I saw that was a common response to blower issues, successful replacement but the blower is still not working. I have swapped out blower related fuses but still no blower and the other electrical issues remain.
Are the blower, seat heaters, and fob receiver on circuit? Am I now just going to chase wiring issues?
After looking for other malfunctions I found that both seat heaters were not working. I have not found any other issues.
I replaced the blower resistor as I saw that was a common response to blower issues, successful replacement but the blower is still not working. I have swapped out blower related fuses but still no blower and the other electrical issues remain.
Are the blower, seat heaters, and fob receiver on circuit? Am I now just going to chase wiring issues?