wpurple
Explorer Addict
- Joined
- July 16, 1999
- Messages
- 1,094
- Reaction score
- 2
- City, State
- CT
- Year, Model & Trim Level
- 97 Explorer
Came across this tip tonight just surfing and thought it was worth sharing:
When replacing a fuel filter, pour a little fuel through the filter inlet to "pre-wet" the filter element inside. This will reduce the risk of the filter element shredding loose paper fibers into the fuel system when the pump starts up and sends fuel at full force through the filter.
When replacing a fuel filter, pour a little fuel through the filter inlet to "pre-wet" the filter element inside. This will reduce the risk of the filter element shredding loose paper fibers into the fuel system when the pump starts up and sends fuel at full force through the filter.
