Pirate
Member
- Joined
- August 19, 2004
- Messages
- 19
- Reaction score
- 1
- City, State
- Asheville, NC
- Year, Model & Trim Level
- 2003 Limited
I'm about to install a rubber Steering Column Shifter Boot on my 2003 Ford Explorer. OEM 1L2Z3513AA
Old one is shredded and a new one is on the way.. The old one seems to snap right out, but I'm thinking the new one will not be as easy as I have to thread the steering column through it and I'm not sure how the steering column comes out...
I checked YouTube and didn't see a How-To... Can somebody here point me to a link or simply explain the procedure in terms a 'luded out chimp would understand?
Any advice would be appreciated..
Old one is shredded and a new one is on the way.. The old one seems to snap right out, but I'm thinking the new one will not be as easy as I have to thread the steering column through it and I'm not sure how the steering column comes out...
I checked YouTube and didn't see a How-To... Can somebody here point me to a link or simply explain the procedure in terms a 'luded out chimp would understand?
Any advice would be appreciated..