Texaswildman
Member
- Joined
- October 25, 2011
- Messages
- 20
- Reaction score
- 0
- City, State
- KY
- Year, Model & Trim Level
- 2000 Merc Mounty 5.0
I have a 2000 Mounty 5.0 with automatic a/c/heat controls. However, it appears that the setup for the blend door actuator is for a manual. I ordered Dorman 604-201 http://www.rockauto.com/catalog/moreinfo.php?pk=971097
but when I got it I realized that there is a post in the rear towards the drivers side. The 604-201 doesn't have a whole for that post where as the 604-202 http://www.rockauto.com/catalog/moreinfo.php?pk=971133 (which states it's for a manual ac/heat) does have that whole. WTF? Will a 202 even work on this truck? I plugged in the 201 and it does rotate when I change temp. Again...WTF?
but when I got it I realized that there is a post in the rear towards the drivers side. The 604-201 doesn't have a whole for that post where as the 604-202 http://www.rockauto.com/catalog/moreinfo.php?pk=971133 (which states it's for a manual ac/heat) does have that whole. WTF? Will a 202 even work on this truck? I plugged in the 201 and it does rotate when I change temp. Again...WTF?