jakejeff
Member
- Joined
- May 26, 2002
- Messages
- 48
- Reaction score
- 0
- City, State
- ontario
- Year, Model & Trim Level
- 1994 xl
I just purchased warn manual hubs to replace garbage automatic hubs they will not arrive for about 3 -5 day's but I have a few dumb questions before converting.
First time doing anything like this
1. I have read that I need a spindle nut socket, do I need 2 one to remove the garbage auto hubs and one to install warn hubs??
2. When I get new hubs (manual) will their be new bearings to pack or they don't come with bearings?
3. I am going to fraise this the best way i know how..
the assembley that is connected to the spindle currently moves in and out about a 1/4 inch by hand on the driver side but not on the passenger side should it move in and out or not???
4. any other tips so I don't rip all my hair out while attempting this conversion???
thanks everyone awsome site!!
1994 ford x 4.0 xl
2 door
First time doing anything like this
1. I have read that I need a spindle nut socket, do I need 2 one to remove the garbage auto hubs and one to install warn hubs??
2. When I get new hubs (manual) will their be new bearings to pack or they don't come with bearings?
3. I am going to fraise this the best way i know how..
the assembley that is connected to the spindle currently moves in and out about a 1/4 inch by hand on the driver side but not on the passenger side should it move in and out or not???
4. any other tips so I don't rip all my hair out while attempting this conversion???
thanks everyone awsome site!!
1994 ford x 4.0 xl
2 door