TheAustinator
New Member
- Joined
- September 12, 2014
- Messages
- 4
- Reaction score
- 0
- Year, Model & Trim Level
- 02 Explorer Sport Trac
PLEASE READ ENTIRE POST BEFORE RESPONDING
2002 Explorer Sport Trac 4WD
The passenger rear brake light/blinker does not work. Lights up with running lights, so that eliminated the wire being burnt or disconnected. Does not light up with braking, does not light up for blinker, blinker is blinking fast and the front one works.
Things I've tried:
-Replaced the multifunction switch
-Fixed/replaced multifunction switch harness
-Replaced the bulb :/
Summary: Power is able to go through the wires to reach the bulb and light up the running lights. Multifunction switch is completley funtional, there's something inbetween that's stopping the signal for the braking light and blinker.
I don't have access to fancy programs like "alldata" to get wire diagrams, they would be appreciated. Any advice/tips would also be appreciated. Feel free to ask question, I wrote this in a rush so I might have missed a few things. THANKS
2002 Explorer Sport Trac 4WD
The passenger rear brake light/blinker does not work. Lights up with running lights, so that eliminated the wire being burnt or disconnected. Does not light up with braking, does not light up for blinker, blinker is blinking fast and the front one works.
Things I've tried:
-Replaced the multifunction switch
-Fixed/replaced multifunction switch harness
-Replaced the bulb :/
Summary: Power is able to go through the wires to reach the bulb and light up the running lights. Multifunction switch is completley funtional, there's something inbetween that's stopping the signal for the braking light and blinker.
I don't have access to fancy programs like "alldata" to get wire diagrams, they would be appreciated. Any advice/tips would also be appreciated. Feel free to ask question, I wrote this in a rush so I might have missed a few things. THANKS