SailorKane
Member
- Joined
- December 28, 2009
- Messages
- 27
- Reaction score
- 0
- City, State
- Tampa, FL
- Year, Model & Trim Level
- Explorer '97 4x2
I know this information on this thread is old, and has been used by many people for several years. However, I just did my upper control arms and lower ball joints and found this information SO informative. Without these photos and information, I would not have tried the job. With it, a $1400 ball joint job became just $200 for parts and probably $50 for some tools, sockets, etc. Just fantastic. The left side took a day and a half. The right side took less than 3 hours. "Once you have done it, you know how to do it."
So I thank the alien gurus from the previous civilization (circa 2007) who published this fantastic information for us future archeologists to find. And strongly recommend to others that, if I can do it, anyone can.
Peace and fair winds. Mark.
PS: I put the same posting on the upper control arms, since I did both.
So I thank the alien gurus from the previous civilization (circa 2007) who published this fantastic information for us future archeologists to find. And strongly recommend to others that, if I can do it, anyone can.
Peace and fair winds. Mark.
PS: I put the same posting on the upper control arms, since I did both.