Jim F
Well-Known Member
- Joined
- February 9, 1999
- Messages
- 406
- Reaction score
- 0
- City, State
- Martinez, CA
- Year, Model & Trim Level
- '98 XLT
An FYI....
I was looking for wheel locks for my 98 and heard that the McGard line was the best. I located a retail source where they looked up the part for my year. The part number that I bought would fit the studs, but the "hub cap" cover would not fit all the way on. My other concern was the lug wrench in the Explorer was 3/4 inch and the key for the locks was 13/16. I emailed McGard with my concerns and they gave me a different number for an open style that also used a 3/4 wrench for the key. This is what they look like:
Dead Link Removed
The part number they gave my was 24010. They would fit under the hub cap and uses either size wrench. The place I bought the first ones had to order them but they were willing to exchanged them.
Click Dead Link Removed to see the web page.
Hope this is helpful for anyone looking for wheel locks.
------------------
Exploring CA
98 XLT 4X4 4.0L SOHC
[This message has been edited by Jim F (edited 03-10-2000).]
I was looking for wheel locks for my 98 and heard that the McGard line was the best. I located a retail source where they looked up the part for my year. The part number that I bought would fit the studs, but the "hub cap" cover would not fit all the way on. My other concern was the lug wrench in the Explorer was 3/4 inch and the key for the locks was 13/16. I emailed McGard with my concerns and they gave me a different number for an open style that also used a 3/4 wrench for the key. This is what they look like:
Dead Link Removed
The part number they gave my was 24010. They would fit under the hub cap and uses either size wrench. The place I bought the first ones had to order them but they were willing to exchanged them.
Click Dead Link Removed to see the web page.
Hope this is helpful for anyone looking for wheel locks.
------------------
Exploring CA
98 XLT 4X4 4.0L SOHC
[This message has been edited by Jim F (edited 03-10-2000).]
