I have done a little bit of looking around on the forums and have not found anybody that has done a full boat-side to an explorer. Below there are two pictures that are a cherokee. That is what I am trying to acomplish. The other three pictures are of my 92 ex that I have taped up and am contemplating cuting. The top of the blue tape is where the slider would be welded to the A, B, C pilllars, cage work (inside and out) and the frame at a 45 degree angle. This set up would elimate about 12 inches of body that is currently hanging, that catches you up on the larger rocks. This would mean that I would have to make the body ridgid to the frame, have to cut the doors and pillar and to adapt all cage work to the new rocker/slider in one.
Let me know what you guys think before i do this and if you have any in-put on the logistics of this mod. The explorer is "questionably" street leagal and I would like to keep it legal as possible even though it is a trailer queen. I do drive it around town every once and a while cause its fun to drive and all the j**pers waive till they realize its not a cherokee, then they just look confused or discusted. That cracks me up everytime
I built the cage, sliders, everything by myself or got a hand from a buddy. Fabrication is not a problem. I will do a write up if the cutting and welding and lots of pictures if this is something anyone is interested in?
thanks for your time guys,
Let me know what you guys think before i do this and if you have any in-put on the logistics of this mod. The explorer is "questionably" street leagal and I would like to keep it legal as possible even though it is a trailer queen. I do drive it around town every once and a while cause its fun to drive and all the j**pers waive till they realize its not a cherokee, then they just look confused or discusted. That cracks me up everytime
I built the cage, sliders, everything by myself or got a hand from a buddy. Fabrication is not a problem. I will do a write up if the cutting and welding and lots of pictures if this is something anyone is interested in?
thanks for your time guys,