Dick, I can't help you as I have US model, but for everyone else out there I would like to share my story. Fan worked intermittently. I replaced switch, same results. I replaced relay, same results. As I was replacing resistor pack I accidentally left my ignition on, fan on setting 2 as I was replacing resistor pack. Fan kick on I switched the fan speeds all worked well. I shut off fan at control panel. Turned of the ignition, and I continued to install the resistor pack. Put the cruise control box back into it's place. Started engine. Turned switch to fan & nothing again. I replaced the wiring harness plug end. All works like new. It was a bit of corrosion at resistor pack & wiring harness that was the culprit in the first place. $40.00 could have fixed mine but spent 2X that instead. So in recap, if it works intermittently on all speeds, replace resistor pack & wiring harness plug end. Your problem should be resolved.