mecheng2
Member
- Joined
- October 25, 2010
- Messages
- 17
- Reaction score
- 1
- City, State
- Minnesota
- Year, Model & Trim Level
- 2003 XLS
Alright, so this car has been a bit more of a project than I intended when buying a newer car, but I thought I had everything nipped in the butt tonight...but I thought wrong. So in owning it for a little over a month here is everything that was done: Rebuild rear diff, front passenger hub assembly replaced, completely replaced rear brakes, but after all this (all of this was performed at the dealership under my 1000 used car warranty) there was still noise from the front, so today I did the following: replaced front drivers side wheel hub assembly, and new rotors and pads on the front brakes. After completing the work (that wheel hub assembly is a B&t$h!!!) I pulled out of my driveway, drove to the end of the street and there was no noise..YAY!...except when I turned right at the end of the street there was some pretty serious vibration in the steering wheel and front end... :-( ... SO...I need some advice on what I screwed up today while replacing the wheel hub assembly! I would really like to not have to bring it to the shop, but that is where it will be if I don't figure this out over the weekend!