2000StreetRod
Moderator Emeritus
- Joined
- May 26, 2009
- Messages
- 10,597
- Reaction score
- 334
- City, State
- Greenville, SC
- Year, Model & Trim Level
- 00 Sport FI, 03 Ltd V8
I'm finally getting to replacing the nonfunctional aftermarket radio/CD player in my 2000 Sport with a salvaged factory unit I purchased via eBay. The factory radio with wiring connectors/pigtails was advertised as coming from a 2000 Sport. It has the C256 radio connector and the C215 subwoofer connector. I have no subwoofer nor wiring for it in the radio harness.
My problem is that not all of the C256 pigtail wire colors match the wiring harness colors.
There is a red/black wire connected to pin 3 (fused ignition "Start" to module, GEM input) of C256. There are two red/black wires in the wiring harness.
There is a light blue/red wire connected to pin 1 (lamp return pulse width dimmer) of C256. There is no blue/red wire in the wiring harness. The only unmatched wire left in the harness is gray/black.
Can anyone help?
My problem is that not all of the C256 pigtail wire colors match the wiring harness colors.
There is a red/black wire connected to pin 3 (fused ignition "Start" to module, GEM input) of C256. There are two red/black wires in the wiring harness.
There is a light blue/red wire connected to pin 1 (lamp return pulse width dimmer) of C256. There is no blue/red wire in the wiring harness. The only unmatched wire left in the harness is gray/black.
Can anyone help?