Search results

re: Head Gasket I Wouldn't Worry About Not Removing Too Many Bolts. I Just Redid My 93' And Every Bolt Comes Out From The Block Up. You'll Also Need a T-55 Torx Socket For The Head Bolts. "Everything," Meaning All The Accessories On The Front, Upper & Lower Air Manifolds, Fuel Plenum, And...

What's The Stat Recheck?

re: waterpump try www.autozone.com they have a section on how to do it, just log in with your explorer first. It'll give you step by step.

:us: I Have 91' And 93' XLT's. I Just Rebuilt The 93' Up From The Pistons Due To A Cracked Cylinder Head From The Guy I Bought It From. So I Have Some Experience Under The Hood, My 91' Is A Powerful Truck, But I Know I Need To Change The Piston Rings. After I Get Down To The Block, What Do I...

Gaskets Are Always Better. Should Only Take About 30mins To Get Water Pump Off If You Know How To Do It. Maybe An Hour Total. I Broke My Whole Engine Down To The Pistons In 85 Minutes... Just Make Sure You Have 10mm And 1/2 Inch Sockets. Stop Leak Doesn't Always Work. Better To Do It Right The...

My 91' Was Hit By A Cement Mixer In November... New Door And Fender....Good As New.

Hey Don't Forget, In A 4dr There Can Be An Amp In Each Post Between Doors At Bottom. My 91 And 93 Both Have Them.

Did You Try The Fuel Cut-Off Switch Under The Dash? Mine Got Jarred Once And Disconnected.

Radius Arm Bushings I've DOne This On Both My Trucks, A 91' XLT and A 93' XLT. Depending On The Condition Of Your Suspension (rusty bolts...etc), You Might Wanna Take It To a Mechanic. It's Only Like 100.00 For Them To Do It And Saves The Hassle And Headache. Alot Of The Nuts Are Hard As Hell...

Ohv Pcv It's Located in The Same Area Of The Engine, Rear of the Driver's Side Valve Cover, Under The Edge Of The Upper Intake Manifold, Under The Vacuum Tree.