Search results

I just equalized the frame rails to the ground to make equal ride height. I didn't even notice where the bolts were in relation to each other - didn't care, either. I made them equal w/o driver, since the passenger and towing capacity are variables. I'm not racing here, just a daily...

I believe the problem is solved. I adjusted the torsion bars to level the ride height (which was wayyyyyyy off, BTW), and the clunking sound is gone. I did not, however, find any rubber pads in the torsion bar ends. Either they are small, non-existent, or I'm an idiot. It looked like the bar...

Make sure your rear wiper switch is not on....(ssuming the wiper is not moving).....Happened to me. My rear wiper motor was locked up. Aparently I tried a few times using the switch to get it to work, and accidentally left the switch on with the motor stuck. Every 5 or so days the battery...

I thought about this as well, and was just going to replace both the engine and trany mounts....but upon inspection, they looked fine and held up well with a light jack lift to the engine; so I doubt that is the problem but they are the next cheap fix on the list. I need to read up on the...

I have the dreaded front clunking noise going over bumps and accelerating/decelerating. It appears to be mainly from the driver side. In an attempt to fix it, I replaced these parts with new (within the last month), and the problem still persisits!: New: Tires Shocks Brakes -...

Excellent write up ! This saved me hours of diagnosing it myself. A hairline crack in the solder - quick hit with the iron and all is well. Very simple fix - took me less than 20 min start to finish. I just tin'ed the leading edge of my iron pretty well, added a dab of flux to the resister...