Search results

I got about 1.5 quarts of fluid out. I picked up a used transfer case, going to try swapping that out this week and see if that solves the issue

So I either found a problem or created a new problem while changing the transfer case fluid. After I drained the old fluid and was in the process of putting in the new fluid i noticed that it was leaking out right next to the drain plug on the bottom of the transfer case. After looking closer I...

Binding while making turns is my biggest complaint. I have not changed the fluid in the TC, I'll try that tonight. Do you know off hand what fluid to use and how much? Should I be able to just cut the brown wire and see if the issue goes away?

Well last night I tried a couple of things to get the front wheels to disengage, but none of them worked. I tried pulling fuse 12 from the fuse panel under the drivers side dash. I also tried disconnecting the 4x4 control module behind the glove compartment. I did research the brown wire...

It is the 4.0L AWD. I've attached a screenshot of the thing that I unplugged that gets the vents working again. Do you have more detail on "cutting the brown wire from the 4WD module next to the radio in the dash"?

Air is only blowing through my defroster and I can't get the 4WD to disengage from the front tires. I'm suspecting a vacuum issue somewhere but have not found any leaks. I did trace the vacuum lines up to the side of something by the brake master cylinder, and when i wiggle and pull that out...