Search results | Page 6 | Ford Explorer Forums

  • Register Today It's free!

Search results

  1. Josh P

    SOLVED: Drove good when I parked it Friday....now it misfires!

    I'd say 2021 when you could get it with a 392
  2. Josh P

    Josh P's 05 Jeep Liberty diesel

    I've found the flywheel housing I need. It shipped from Canada today. I found the clutch brake pedal assembly in Ontario, OR. They pulled it today and I'll be picking it up on Wednesday when I pass thru. The flywheel housing has a rubber gasket on the back, I'll need to figure out a part number...
  3. Josh P

    4.0L oil level sending unit.

    It's been long enough I'm not sure if it's 27mm or 28mm that I used to replace mine several years ago
  4. Josh P

    SOLVED: Drove good when I parked it Friday....now it misfires!

    How bad is this misfire? A little noise on a cylinder or like a timing chain jumped a tooth?
  5. Josh P

    Solved The car is leaking antifreeze not from the radiator.

    If it's the 4.0 check the thermostat housing and hose that goes to it. Another possibility is the water pump, I've had them leak at the impeller shaft.
  6. Josh P

    SOLVED: Drove good when I parked it Friday....now it misfires!

    413,000 sounds like a record on a sohc. Has any of the timing components ever been touched?
  7. Josh P

    Murraymountain’s Lowered 95 Sport

    The more bass the better. I'd be curious how D.J Magic Mike sounds with those speakers. Back when I was in High school I had a stereo in my room with a pair of 18s, a pair of 15s and two 12 inch subs. I got in trouble a few times for knocking pictures off the walls around the house.
  8. Josh P

    Josh P's 05 Jeep Liberty diesel

    I've been pondering this project a lot lately. I think I might have to do some clearance workand go with the SAE 2 flywheel housing. I looked at having an adapter made to fit the modular pattern flywheel housing, problem is stacking a lot of mass beyond the crank spacer. The 10 bolts that hold...
  9. Josh P

    1992 explorer gets a solid axle and v8 5 speed

    I'm out driving right now and don't have any pictures with me.
  10. Josh P

    The Aerostar build date is confusing.

    Double check the 10th position. 7th is correct, 8th should be x. I suspect 3 is in the 9th and there should be a P or R in the 10th spot.
  11. Josh P

    Main Bearing Clearances

    I looked at the other thread, and am wondering if you marked where the caps went?
  12. Josh P

    The Aerostar build date is confusing.

    I assume since it is known the van was built in December, the tag was checked. What is being asked is, what is the production dates for each model year. Ford starts the next model year the Monday after 4th of July. I do know multiple model years can be built at the same time such as 93 and 94...
  13. Josh P

    The Aerostar build date is confusing.

    what is the 7th and 10th vin letter or digit?
  14. Josh P

    1992 explorer gets a solid axle and v8 5 speed

    What's under the tarp?
  15. Josh P

    1992 explorer gets a solid axle and v8 5 speed

    Midnight madness sale. All items marked with red paint must go.
  16. Josh P

    2000 X AWD 5.0 cranks but no start after new exhaust/cats installed

    I'm glad you're on the right track and it's running again. No laughter from me, this is how many of us learn, nobody is perfect. You got it, that's what matters. Also explains why you had ignition spark and it wouldn't run on starting fluid. Amazing odds it decided to give up after getting the...
  17. Josh P

    just joined with 2 aerostars

    I had a 91 4.0 aerostar that I did a manual transmission swap on.
  18. Josh P

    New Chains but Now Running Poorly

    I'd swap the injectors on 5 and 6 with 1 and 2. See if the miss follows the injectors.
  19. Josh P

    A Handshake Deal for America: Ford Employee Pricing for Everyone

    (Please note that this excludes Raptors, specialty Mustang and Bronco vehicles, the 2025 Expedition and Navigator SUVs and Super Duty trucks.) Pretty much half the lineup isn't eligible. The word and appears too many times for a single sentence.
  20. Josh P

    1992 explorer gets a solid axle and v8 5 speed

    Krylon overhaul. I'm watching this build with interest.
  21. Josh P

    Do you guys think I am nuts?

    You just described half of California.
  22. Josh P

    1992 explorer gets a solid axle and v8 5 speed

    It has 6 gears and Grandma used them all on the highway.
  23. Josh P

    1992 explorer gets a solid axle and v8 5 speed

    I want to be in it...
  24. Josh P

    2000 X AWD 5.0 cranks but no start after new exhaust/cats installed

    None of us are hating, just an unusual set of events. Carry on...
  25. Josh P

    2000 X AWD 5.0 cranks but no start after new exhaust/cats installed

    You posted it, so no doubt there.
  26. Josh P

    2000 X AWD 5.0 cranks but no start after new exhaust/cats installed

    If that was the case, I'd have to give credit for how well written it is describing the frustration. I would like to see pictures of the modified fuel rail.
  27. Josh P

    How to check voltage incoming in the inertia switch

    1. Yes jumper 30 to 87 2. Yes 3. Yes. If you do have power on the green wire but not on the pink with black stripe, jumper those two to bypass the inertia switch, then check for power at the fuel pump connector.
  28. Josh P

    2000 X AWD 5.0 cranks but no start after new exhaust/cats installed

    I've come to the conclusion that the Looney Tunes was created based on real life experiences. The compression test will reveal any issue with the motor.
  29. Josh P

    410Fortune 1988 Ford Bronco II Eddie Bauer 4x4

    Time for a dana super 60 swap.
  30. Josh P

    NEEDED: Atlas II Xfer Case

    I wonder if northwest fab works makes one but doesn't list it on their website?
  31. Josh P

    NEEDED: Atlas II Xfer Case

    They quit making the Ranger OD unit as well.
  32. Josh P

    93 4.0 Engine build help

    There's plenty of abused high mile units out there doing dependable, faithful service.
  33. Josh P

    93 4.0 Engine build help

    I'm itching to do one
  34. Josh P

    1987 Ford Bronco Dana 35 Swap

    Looks like it barely clears the door.
  35. Josh P

    2000 X AWD 5.0 cranks but no start after new exhaust/cats installed

    A gasoline engine will run on starting fluid without needing any gas mixed with the starting fluid. A compression test would be next on the things to check. Harbor freight has an inexpensive unit.
  36. Josh P

    2000 X AWD 5.0 cranks but no start after new exhaust/cats installed

    Since it won't run on starting fluid that means 2 things, either there's an issue with the ignition system or there's an issue with the engine. Spark plug wires could have been messed with. You stated someone else has a remote. With the engine it's almost lottery odds something happened to the...
Back
Top