Search results

I live at the bottom and thought it would be easier to tell where the noise was coming from.

I have a 1995 Explorer with 320,000 miles on it. I have gotten rid of a lot of the front end noise, but still have noise with a little vibration coming from the front left. I have new tires, replaced both front hubs, new brakes and rotors all around, new upper and lower ball joints and tie rod...

How much more are the hubs from Ford?

Mine was doing the same thing. I changed upper and lower ball joints and the tie rod ends but still had a rubbing noise from the right side especially in corners. When I changed the hub bearing it went away. I could also tell from taking the wheel and brakes off and when spinning the axle it...

I ended up going to Auto Zone and renting a puller. The rotor came off in about a minute. I don't use the parking brake and don't have to pass an inspection in our state, so I am going to leave it alone since the cable and both brakes are rusted solid. The new rotor slides right on and...

Thanks for the post! I just did mine a couple of days ago and printed out your directions and it made everything easy. I picked up my hub from Napa for less than $130 and it came with the cable clips. It seemed like good quality, now I will see how it holds up. Sounds much better especially...

I am having the same problem. It must be hung up on the lip because it will move out about a 1/4". I took out the rubber plug but the adjustment is seized. I sprayed some PB in there and will try again tonight after work. If not I wasn't sure where the heads of the retainer pins were located...