Search results

There are only three parts to the egr system. the valve itself (about $50), the vacuum solenoid which opens the valve (about $30), and the flow sensor (about $20). i had the same problem and replaced all three. if you go easter egging for the problem start with the cheapest, which was the...

hey gjarret, i posted a similar question a while back, i also got a DTC 0741 when my od light flashed. since then i found a TSB numbered 97-22-4. on the TSB, it says "Some vehicles may experience excessive torque converter slippage, torque converter not engaging, or Diagnostic trouble Code...

yeah, that would be correct, but could the torque converter lockup solenoid be the cause of my recent problems?

hey i did some work to my 96 4.0l a while back, long story short, i replaced the flex plate, torque converter, and oil pump for its 4r55e. since i put everything back together, my o/d light has been flashing and have noticed it will shift hard at random times from 1-2. the hard shifts occur...

your haynes manual covers what to check for with respect to the position sensor. it will tell you to remove the plug, then check continuity between different pins depending on what gear you are in.

hey i appreciated the input. there were more problems with this transmission than i had realized and the whole thing is going to have to be rebuilt. thank you all. dave

hey, i ran into a couple of problems with my 96 4.0l. first i replaced the flexplate for the second time this year. both times it sheared in two. im trying figure out the why to this problem, so i dont have to do it again. i noticed some mechanical damage when i pulled the torque converter...