Search results

It was the wiring harness where it had worn through. Repaired it, and it's doing great now.

Thanks for the reply. Yes, the horn does work. After a bit of checking I found the servo had been sitting on a wiring harness, and one wire had worn to the point of about 1/4 inch was gone. I jumped that wire, and the cruise light flashed as I retried the procedure. Going to fix the wire in the...

I found and performed the procedure, but the cruise light never came on. Will a blown bulb make the cruise not work?

Thanks for the info, at least I can try to do a search for the test procedure. And mine does have just the cruise buttons on the switches. Earlier, I had the airbag off checking the wires, and I hadn't noticed as it has been a while since the cruise has worked, but now the lights on the off/on...

Cruise stopped working, light was really dim just after it stopped, now it does not come on at all. I have jumped wires at brake pressure switch, checked fuse, brake lights do not stay on, horn works, and cables still attached from servo. I'm not sure what else to check, but I am thinking...

I replaced the fuse again, and didn't turn it on, just the minimal flow it gives, and it never blew,, I didn't have it on high, maybe on 2nd speed. I thought I heard a knocking or pecking sound right before it blew... then stopped after I noticed the fan quit. So your prolly right about it...

Only when on. Ran for about 2 minutes.

Heater stopped blowing, figured out it was the 40 amp maxi fuse in the box under the hood. Replaced it, and a couple minutes later it blew. What do I need to check for to find the cause of it blowing? Any help is appreciated..