Search results

Hi, Tom, old stuff dig out .. hope you have resolved your issue , if has could you share ? or I recently found a setting / testing model for Sync , mean you press the 'CD eject ' button and ' right seek' button together, it will get into this model , not sure if this can help any .

thx man.

hi, wondering if any lucky for this setting ? with the X to 1 to 5 in second line, you did added menu in IPC for Darkmode on/off ?

yes, hardware, sorry I made confusion in my question, I am thinking about what hardware it could be , in PIU but not in normal version, maybe a different beam module if a simple switch can be added, that is worth to try.

it prompted the additional HW is needed , right? not sure what HW it is..

hi, no luck so far, there is no way to make front signature lights as DRL as so many combination tried. I am starting doubt the CA version or US version has some physical difference , or must be somewhere tricky ...

thx!

got it , just try to help. yes, here is same for China version, the DRL is always on and no button or options to shutdown before revise above setting, I checked the ab file difference between CN and CA , the difference are in 726-50-1 CA is 017F and CN is at 108E , so I am wondering if your...

yes, Peter, with that set , there is a option in the IPC with turn DRL on or off, what I am seeking is turn on / off DRL but keep signature light always on.

hi, thx, That's really what I am looking for , did you do revision rather than below ? BCM 726-16-02 0101 0101 0049DRL (Cluster Control 1 enabled) BCM 726-21-01 xxxx xxxx x1xx IPC 720-02-01 xxEx xxxx xxxx (Daytime Lights option & Lane Keeping System present in Settings) OR IPC 720-02-01 xxCx...

Many thanks my friend!

just in case, I found this in another forum, BdyCM 726-45-01 xxxx 7Fxx xxxx Allow all DRL choices , maybe this need to be turn to 7F before other DRL setting can be changed.

thx for quick reply, just compared the data, looks only difference is BCM 726-41-02 xxx0 xxxx xxxx, this address is for 'Double Horn Honk ' and I have tested works, I will try to revise it to 0 tmr, so this might be some conflict . btw, just confirm, there is a option ( checkbox ) in your IPC...

hi， I just tired, with additional revision on 726-58-02 39 bit rather than 726-32-01 , it works ! thank you. and I found the DRL is disabled as well, actually this is a real dark mode, policy for sure do not wanna DRL while they wanna to be dark, but if DRL can be turn on while others DARK, it...

hi, could you share the address you changed to make DRL on/off in menu ? I revised 720-02-01 xxEx xxxx xxxx , the menu is there but do not really control the DRL on and off. meanwhile the setting of 726-16-02 0101 0101 00zz and 726-21-01 xxxx xxxx x1xx . 726-50-1 go to 108E then 017F , all...

no , it is not a PIU, just normal 2.3T version.

Thank you for sharing ! yea, I try to find out the menu also but seems no any clue , I even did not heart there is a menu on explorer can use Dark Car, that is not reasonable ... I ever made a physical switch in the rely box but not really convenient also not possible to close the door of rely...

Many Thanks, I think 726-58-02 is the one I missed in last try. I will try on my 2017 ELT this week.

thx and wish a good luck on the weekend try, the courtesy light disable/dark difference in PIU all in below address? 7A5-01-01 bit 32 726-32-01 bit 23 726-58-02 bit 39 could you share the PIU setting on those address you compared?

thx KayGee,and remind! is this from a comparison from a PIU AB file or any clue ? I will take time to try .

hi, my model is in ELT indeed, ELT is for China Market. :p

thx Peter! just updated it.

on the road

hi, sorry maybe I post this twice , I found it was posted in a wrong thread list, is there anybody successfully done the dark car function change via FORScan ? I tried change the setting in address of 726-32-1 , and it does not work, all doom lights still keep light every time I open / close the...