Search results

sound Please dont lauph to hard but you can make your own tunable muffler that sounds however you want it to. fist you need broken or a bent drive shaft, big around as you can find. then cut a section out of it say about a foot and a half long. Then cut very thin slots in it with a torch...

gears I am running 3.73's with 30x9.50 tires. I have used a math equastion from an offroad mag. But I was hopeing to get a number from some body that is actual running 4.56 w/33's so that there is no guesing or math error. My math says at 70 mph I will be turning around 2500 rpm's w/4.46 and...

I hope this isnt to late Well I hope you didnt spend any mony on this issue. Fords do this alot, every newer modle that I can think of. Yes your sensor was bad, no it shouldnt need to be replaced again. Sometimes on fords and especialy on explorers if you have a high flow exhaust system the...

nasty this may sound weird but sometimes the calking that ford uses in the seems of there body work can smell like b.o. We had this problem on an 85 ford 3/4 ton. just make shure that no heat is geting to any seals or calking, this may be your problem but I doubt it. Good luck

tools Go to auto Zone and ask for a fuel, air conditioning line changing tool set. dont use the ones that are round. get the ones that look like coins with little 1 inch(APPROX) gun barrols centernd in them. there should be two small ones one light blue and one grey use the grey and put some...

your air john just replace your switch in the dash control panel, the one that ajust the high/low seting. In an expedition iv seen them do the same thing, what happens is there is a small gear drive behind the switch wich the nob moves diagonaly, its plastic. the gear strips from some one...

hunter you can hunt from your truck not on public highways, or just while driving around, but Im on my own property here in texas. We build trucks that are the dear blind. beside just exploreing new territory on the ranch can scare off the wildlife with that loud pump, thanks for the tips...

Well Im a hunter and a loud winning powerstearing pump doesnt cut it. any ideas?

fix well I dont know exactly what your problem is, but dont drive your explorer anymore than you have to. Those trannys dont just let lose in one area, when they decide to go they realy go. I hope you are speaking of the automatic transmission. Well the first thing you should do is try changing...

I have some other cazy idea that my acualy be stupid. Well, apparently the 4.0 is similar to the 2.9 litre (the 4.0 is basicaly a 2.9 stroked and bored). Since this is the case will 2.9 litre heads bolt on to a 4.0, are the heads identical? Because World Products makes a performance 2.9 litre...

reply Well now that most of my questions have been answerd I know have some other cazy idea that my acualy be stupid. Well, apparently the 4.0 is similar to the 2.9 litre. Since this is the case will 2.9 litre heads bolt on to a 4.0, are the heads identical? Because World Products makes a...

engine Thanks, vanirtech has alot of good stuff, but I still have yet to find somebody that makes a stroker crank. Does anybody know if the factory crankshaft is heavy duty, enough to offset grind. Any comments are appretiated.

My 1992 4.0 has 220,000 miles on it and it still runs good. However I am converting it to 4x4, and since I will not be driving it for a while I may as well go through the old tired motor. This brings me to a few questions. Are the lifters in my explorer rollerlifters from the factory? Are the...

In the past three weeks my explorer has started to make a clatering noise. Possibly from the cat. I have since used some premium octane fuel, and that has helped. But the car is not recomended to run on this type of gas. This problem only ocurrs during the winter months. Any sugestions?

I'v heard a few roomers that if i give my 1992 explorer 4.0', automatic 4 speed w/od, over 230 horses, that my torqe converter will over expand on high exelaration and make contact with the flywheel resulting in posibly me missing a foot or two. Is this true,if you can set this roomer strait i...

OH the miles my 1992 2x4 explorer has 220,000 miles. Runs great and never mechanicaly been touched. She still starts on the first crank. She has reacently aquird some attention, but only miner. The powersteering pump plastic fill tank is leaking dripidy dropidy, and my power windows have...

Does an explorer 1992 4.0 have roller lifters, who makes replacement perfomance stuff for cams, and valvetrain products? I know that comp cams make a nifty little cam, but only offer the cam by itself. Where can i get roller rockers, or can i even get them.

supergharger reply Thanks, thats some good stuff. I,v never seen these super chargers. You say i could find a used set up cheap, where is this, or who do i contact. Or fabricate my own? please explain this, as i have acsess to several exelent and cheap machine shops in my area.

What is the best supercharger for a 1992 ford explorer 4.0? Including price, performance, and use. For the money whos the best?

identifying Thanks for the info, this leads me into a few more questions. How do I konw if the transfer case is a BW 13-54, are they marked on the factory atachments, like a differentail with its little number ID tag thingy. And are Dana 35's factory equipment for rangers, say from 1990-1995...

Can a bronco II or ford ranger 4x4 system 89-95 bolt on to a 92 ford explorer