bearing replacement

So there's no question about it, I have to pull the tc! 97' Explorer XLT Control Trac 4WD.... BW4405 TC The output shaft is very loose! Drained the fluid and and it's black with some silver dust(pictured) but luckily I don't see metal flakes or any chunks of any kind.... I do see some very...

Ive got a 99 explorer XLS and i'm pretty sure I bent my axle and ####ed up my ball joints and bearings. Anyone out there that can help a dude out and direct me to some directions with photos and or videos on how to fix these it would be much appreciated.

I have noise with my rear bearings on my Sport Trac. Does anybody have any exeperiece replacing the rear bearings on a 2007 Sport Trac? I was told I have to remove the spindle nut, and then use a slide hammer to pull the bearing hub assembly from the socket, Then the bearing has to be removed...

Here is the carnage from a bearing blowout, a friend borrowed my truck for a bit and when she brought it back she said the brakes were locking up.... wonder why? a few shots of the carnage after removing wheel This shows how the entire assembly was riding on the ring...

I am thinking I will get a quick and dirty R&R on my main bearings. I cannot do this myself, I will have to get it done. Suggestions? Is this possible with the motor in the car? Can I R&R the crank or will it have to come out? I have a slight bearing knock when the vehicle warms up so...

I'm replacing the bearings on the Tensioner Pulley and Idler pulley. Now-the tensioner pulley spun on its bearing, I had to shut down the quickly. Has anyone done any bearing replacement on the pulleys I mentioned? Do I need to heat up the pulley before I press the bearing in? I might just...