jlsparky7
Explorer Addict
- Joined
- April 4, 2009
- Messages
- 1,503
- Reaction score
- 3
- City, State
- Woodhaven, Mi
- Year, Model & Trim Level
- 1996 5.0 XLT AWD
135,000 miles
Just replaced the front pads and rotors, rear drums and shoes, ball joints, tie rod ends, and got a 4 wheel alignment. Sway bar links and bushings are in good shape. The clunk was noticeable before all the repairs but seems much worse now. I get an occasional "clunk" when turning. Happens on steep right and left hand turns and comes from the drivers side front.
Im thinking this is either the cv joints or the wheel bearings what do you guys think?
Just replaced the front pads and rotors, rear drums and shoes, ball joints, tie rod ends, and got a 4 wheel alignment. Sway bar links and bushings are in good shape. The clunk was noticeable before all the repairs but seems much worse now. I get an occasional "clunk" when turning. Happens on steep right and left hand turns and comes from the drivers side front.
Im thinking this is either the cv joints or the wheel bearings what do you guys think?
