1998 Ford Exploer Brakes rotors master cylinder pressure control valve calipers

[bigsczba]

I just replaced the rear brake pads rotors, calipers due to freezing up of the calipers. Once that wa completed the bleeding began. I replaced all these parts and then bled the brakes, but to no success the pedal was to the floor. changed the master cylinder as well as the pressure control vale still no sucess what do I do now???

 

[dogfriend]

If you have ABS, you may have gotten air in the ABS pump. If so, you need a scan tool to bleed the air out of the pump. You send a command via the scan tool to move the solenoid valves in the ABS pump.

 

[bigsczba]

Thank you, I TRy That....

 

[dogfriend]

Be aware that not all scan tools will have the ability to send commands to the ABS computer. You either need to use a Ford scan tool (NGS) or an aftermarket tool that has the ability to send commands to the ABS computer.

Good luck