2003 EX Differential Swap??? | Ford Explorer Forums

  • Register Today It's free!

2003 EX Differential Swap???

Swamprabbit

Member
Joined
February 2, 2015
Messages
37
Reaction score
3
City, State
Forrest City, AR
Year, Model & Trim Level
2004 Ford Explorer
I have a 2003 Ford Explorer XLT with 4.0 and 285/65/16's with 3:73 gears. I would like to upgrade to 4:10's. What other vehicles can I swap the front and rear differentials out of that already have 4:10's. I know another Explorer will swap. But is there another vehicle also like the Mountainer for example.
Thanks guys.
Going to a breaker yard just wanting to know my options.
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





can't im pretty sure the only 2 gearsets that came in those housings were a 3.73 and a 3.55. im currently in the middle of re gearing a set of used 3.73s up to a 4.56
 






can't im pretty sure the only 2 gearsets that came in those housings were a 3.73 and a 3.55. im currently in the middle of re gearing a set of used 3.73s up to a 4.56

I know some Explorers came factory with 4:10's. Found a 2004 Mountainer that has factory 4:10's wrecked tha's why I'm asking.
 






ah sorry about that i was unaware that out year came with those options
 






ah sorry about that i was unaware that out year came with those options

I am looking at a possible regearing also. Was told that 4:56 will fit my 3:73 carrier. If I can't locate a reasonable 4:10 front and rear diff. I will be going 4:56 due to 35's with next tire change.
 






yeah i have 34's now and with 3.55's and the 4.slow there is just no power.. the re gear shouldn't be too bad though
 






yeah i have 34's now and with 3.55's and the 4.slow there is just no power.. the re gear shouldn't be too bad though
Where did you get your gears? Link if possible. Think I'm going to go ahead with the 4:56 route.
Thanks ahead.
 


















Is the front standard rotation or reversed rotation. Read both. Not sure which is correct. Rock Auto says standard rotation when looking a bearing kits.
Thanks guys.
 






My front cover shape and bolt count it's a Super 30.
 






How do I find out what my 04 XLT 4.0 automatic has for gearing?
 






look on the door sill, there should be a sticker there identifying everything you need to know
 






is the pumpkin on the drivers side or passengers side ??
if it is on the passenger side just like every other Explorer, Ranger and Mountaineer, it's a counter rotating, or reverse,,
and i would say no,, it's a Dana 35,,
 






Featured Content

Back
Top