03Explo20
Well-Known Member
- Joined
- January 4, 2013
- Messages
- 193
- Reaction score
- 15
- City, State
- Jonestown, Pa.
- Year, Model & Trim Level
- 2003 Explorer XLT
Have a vibration/growl noise when slightly turning the wheel to the left. I changed out both bearing hubs and checked everything out in the front end but can't see anything out of the ordinary. I checked the rear wheels and there is no movement there.
Tie rods, inner and outer, on the front end are a few years old. CV joints/boots look good.
Anyone have any ideas what to check?
Tie rods, inner and outer, on the front end are a few years old. CV joints/boots look good.
Anyone have any ideas what to check?
