Arron
New Member
- Joined
- August 14, 2021
- Messages
- 1
- Reaction score
- 0
- City, State
- Nevada, IA
- Year, Model & Trim Level
- 2004 Mercury Mountaineer
I have a 2004 AWD Mountianeer.
4.0L SOHC V6.(if it matters)
Had to change out front passenger side caliper assembly.
Pretty sure that air got into the ABS
unit as I have tried to bleed the
line with a hand held vacuum pump
and the brake pedal still goes to the floor with little to zero pressure.
So "the Beast" has no brakes.
After mtiple searches I cannot figure out what I need to do to correct this, so I came here for guidance on this.
And I am it seems not smart enough to use the right words to search the site. Ha ha ha.
Thanks for any and all information.
Arron
4.0L SOHC V6.(if it matters)
Had to change out front passenger side caliper assembly.
Pretty sure that air got into the ABS
unit as I have tried to bleed the
line with a hand held vacuum pump
and the brake pedal still goes to the floor with little to zero pressure.
So "the Beast" has no brakes.
After mtiple searches I cannot figure out what I need to do to correct this, so I came here for guidance on this.
And I am it seems not smart enough to use the right words to search the site. Ha ha ha.
Thanks for any and all information.
Arron
