BigBadWimp
Well-Known Member
- Joined
- August 10, 2004
- Messages
- 298
- Reaction score
- 0
- City, State
- Beaver Falls, PA
- Year, Model & Trim Level
- '94 Sport
(This is kind of urgent but I didn't think it was urgent enough to be in the 911 section so I put it here. Prompt replies are greatly appreciated!)
Already replaced master and slave cylinder (clutch and pressure plate while the tranny was out). It's still very hard to shift into almost any gears. Did we not bleed the system right? How close do you have to follow the Haynes manual procedure? My stepdad has his own methods of bleeding the clutch. The clutch pedal seems to have good pressure to it, better than when I brought it to my stepdad in the first place... We're going to try and mess with the master cylinder again today early in the afternoon so any help before then would be great! Thanks guys.
Already replaced master and slave cylinder (clutch and pressure plate while the tranny was out). It's still very hard to shift into almost any gears. Did we not bleed the system right? How close do you have to follow the Haynes manual procedure? My stepdad has his own methods of bleeding the clutch. The clutch pedal seems to have good pressure to it, better than when I brought it to my stepdad in the first place... We're going to try and mess with the master cylinder again today early in the afternoon so any help before then would be great! Thanks guys.
