barneyhyphen
Member
- Joined
- February 11, 2008
- Messages
- 46
- Reaction score
- 0
- City, State
- Nashville, Tn
- Year, Model & Trim Level
- 1999 Explorer EB 4.0 SOHC
Took off the TPS and measured resistance (OHMS) between pins A & B which showed as 780. Manually rotated the center (as the butterfly would do) and resistance increased very uniformly.
Did same measurements on a new one out of the box but it's base resistance was 520.
Is this important? Thanks.
BH
Did same measurements on a new one out of the box but it's base resistance was 520.
Is this important? Thanks.
BH
