Ryan21288
Member
- Joined
- July 12, 2011
- Messages
- 14
- Reaction score
- 0
- City, State
- RI
- Year, Model & Trim Level
- 04 XLT 4.0
Recently I picked up a 04 XLT. The other day I noticed the diff was leaking from the axel seal. Put it up on the lift and noticed the axel was not fully seated in the diff. So I used a pry bar and got the axel to sit back in the diff properly. But once again the axel has worked itself out of the diff slightly. I am thinking that the c clip is bad. I have never had anything like this happen before. Any other ideas?