TAKECOVER
Member
- Joined
- December 7, 2004
- Messages
- 33
- Reaction score
- 0
- City, State
- Huntsville Al
- Year, Model & Trim Level
- 1998 Explorer EB V8
I can't figure out how to get the looped end of the actuator out of the pivot "camlike" piece in the center of the truck. I really do not want to remove the entire "cam" assembly if at all possible. Any help would be greatly appreciated.
UPDATE...... I was able to unbolt the latch assembly and lower it about 2 inches towards the bottom. All the rods stayed together and did not move, and it all went back together fine and worked perfectly!
UPDATE...... I was able to unbolt the latch assembly and lower it about 2 inches towards the bottom. All the rods stayed together and did not move, and it all went back together fine and worked perfectly!
