How to remove/access radio: 2004 Ford Explorer Eddie Bauer

[JeffreyRopp]

Hey guys,

Although I'm a newbie, I'm going to attempt an install of the Ford Sirius receiver kit in my 2004 Ford Explorer Eddie Bauer. I've got the Audiophile system with the 6CD in dash changer. Here's a link to the products I intend to install:
http://www.radiosandmore.com/prod_detail.asp?pn=4047452
http://www.radiosandmore.com/prod_detail.asp?pn=2U6F-14588-BA

How do I go about removing the trim around the radio so that I can actually pull out the radio? What tools will I need? Any pictures would be helpful too.

Thanks!
Jeff

 

[NusenseSD]

a flat bladed screw driver to pry behind the bezel.. The radio bezel is just held in with clips.. Pop the 2 top clips off then gently pop the rest of them off..

To take out the radio I think its a 8 or 10mm bolt.. 2 of them.. Should take you a couple minutes to get the bezel out and the radio unbolted.. Quite simple if I might say so myself..

 

[MrBill]

a flat bladed screw driver to pry behind the bezel.. The radio bezel is just held in with clips.. Pop the 2 top clips off then gently pop the rest of them off..

To take out the radio I think its a 8 or 10mm bolt.. 2 of them.. Should take you a couple minutes to get the bezel out and the radio unbolted.. Quite simple if I might say so myself..

I have an '06 Explorer - would the above apply to removing the radio in my car?